void acoustics - venu 215i v2 - dual 15 inch active subwoofer with integrated amplification and dsp
Venu 215i V2
Whatsapp for enquiry
Void Acoustics - Venu 215i V2 - Dual 15 Inch Active Subwoofer with Integrated Amplification and DSP
Venu 215i V2
Whatsapp for enquiryThe Void Acoustics Venu 215i V2 is a flagship active dual 15-inch subwoofer designed to deliver high-output, extended low-frequency performance for demanding audio installations. Featuring integrated amplification and DSP, it can also power multiple mid-high loudspeakers directly, simplifying system design and deployment. Its powerful configuration makes it well suited to larger venues requiring impactful bass and a streamlined audio setup.
Designed for flexible installation and deployment, the Venu 215i V2 supports an optional top hat with a standard M20 mounting point for satellite loudspeakers, while an optional castor kit allows easier transport. Available in black or white as standard, it also comes in Barewood and Vintage Natural Wood finishes. Custom RAL body and grille colours are available, with KROME grille finishes offered upon request.
Key Features:
- Active, dual 15 inch subwoofer with on board 2400w amplification module
- Two 750 W outputs (4 Ω) via locking loudspeaker connectors
- Built in DSP with 4 preset banks
- Stereo XLR and 1/4″ Jack input connectors
- Compatible with the Void preset library
- Tough, high-excursion neodymium transducers with 3 inch voice coil and FEM optimised motor
- Optional castor kit available
- Optional top-hat providing a standard M20 mounting point
- Available as standard in black with a black grille or white with a white grille, the Venu Series is also offered in two Natural Wood body finishes, Barewood and Vintage
- Custom RAL finishes are available for both the body and grille, with KROME grille finishes available upon request
- Frequency Response1: 33 Hz – Preset dependent
- Maximum Output2: 130 dB cont, 136 dB peak
- Nominal Dispersion: Array dependent
- Driver Configuration: 2 x 15″ LF
- Power Input: powerCON™
- Amplifier Output: Up to 1400W (for Sub) & 2 x 750 W at 4 Ω (400 W at 8 ?)
- AD/DA: 24-bit, 48 kHz
- Onboard Presets: 4
- Input: 2x Combo XLR and 1/4″ Jack
- Outputs: 2x speakON™ outputs
- Weight: 57 kg (125.7 lbs)
- IP Rating: IP-10
- Power Requirement: AC 100 V – 240 V, 50/60 Hz with PFC
- Power Consumption: Standby: <1W, Idle: 10.2W, 1/4 Max Load @8Ω: 700W
- Enclosure: 15 mm birch plywood
- Finish: Textured polyurethane
- Mounting: Optional M20 top hat
- Colour: Available as standard in black with a black grille or white with a white grille, the Venu Series is also offered in two Natural Wood body finishes, Barewood and Vintage. Custom RAL finishes are available for both the body and grille, with KROME grille finishes available upon request
-
1 -10 dB IEC60268-5 2 Calculated