AXIOM | CX14A | 14

14" (356mm) coaxial, High Output, Powered, CORE Processed, Stage Monitor

CX14A

AXIOM

The CX14A is a coaxial stage monitor designed specifically for live sound, although the very compact, low-profile enclosure also makes it suitable for theatre and television applications. The combination of a high-performance coaxial transducer, a carefully designed cabinet, and powerful electronics provides very high SPL before feedback and excellent intelligibility even at very high power.

The transducer’s coaxial design offers a very stable acoustical pattern in both the horizontal and vertical axes. The very compact, single magnet neodymium motor reduces the delay between the two sources, eliminating time and phase problems, and guarantees high performance with a consistent weight reduction.

The high frequency range is reproduced by a low-distortion compression driver equipped with a 3” aluminium voice coil and polyester/titanium diaphragm. The special shape of the cone allows precise and controlled conical dispersion of 80°. The 14” woofer employed in the reproduction of the low frequency range is equipped with a 3” voice coil. Thanks to a special treatment process that makes the cone water repellent, the CX14A is able to perform in adverse weather conditions and is therefore suitable for outdoor use.

SYSTEM
System’s Acoustic Principle 2-way coaxial vented enclosure
Frequency Response (-3dB) 70 Hz – 18kHz (Processed)
Horizontal Coverage Angle 80° (-6dB)
Vertical Coverage Angle 80° (-6dB)
Maximum (peak) Output 131 dB SPL @ 1m
TRANSDUCERS
LF One 14” (355mm), 3” (75mm) voice coil,
waterproof cone
HF One 2” driver, 3” (75mm) aluminium voice coil,
polyesther/titanium diaphragm
ELECTRICAL
Input Impedance 20 k\u03A9 balanced, 10 k\u03A9 unbalanced
Input Sensitivity +4dBu / 1.25 V
Signal Processing CORE processing, 96kHz / 40bit floating point SHARC DSP,
24 bit AD/DA converters
Direct access Controls 4 Presets (NORMAL WEDGE/COUPLED/LOW CUT/USER),
Network Termination, GND Link
Remote Control PRONET control software
Network protocol CANBUS
Amplifier Type Class D with SMPS
Output Power 900W + 300W
Mains Voltage Range (Vac) 230V ±15% - 115 ±15% 50/60Hz (internally selectable)
IN / OUT Connectors Neutrik XLR-M / XLR-F
IN / OUT Network Connectors ETHERCON®(NE8FAV)
Mains Input Connector PowerCon® (NAC3MPA)
Mains Link Connector PowerCon® (NAC3MPB)
Cooling Variable speed DC fan
ENCLOSURE & CONSTRUCTION
Width 507 mm
Height 316 mm
Depth 403 mm
Taper Stage Monitor: 45° and 55°
Pole holder 1 on the side, dual-angle
Enclosure Material 15mm, reinforced phenolic birch
Paint High resistance, black water based paint
Net Weight 16 kg (35.3 lb)