The SW1800A is a compact powered manifolded subwoofer designed to provide sub-bass support for the compact AX800A compact line array, and features some of the most advanced technologies for low frequency reproduction. The manifolded bandpass design uses manifold loading of the front side of the speaker cones to maximize the mutual coupling between the two drivers. This innovative configuration does not use any large resonant cavity to load the speakers, but very compact cavities in order to obtain advantages in terms of definition, both at the lowest end and the upper bass.
| SYSTEM
|
| System’s Acoustic Principle |
Manifolded Band Pass |
| Frequency Response (±3dB) |
36 Hz – 115 Hz (Processed) |
| Maximum Peak SPL @ 1m |
139 dB |
| |
|
| TRANSDUCERS
|
| Type |
Two 18" (460mm) woofers, 3" (75mm) VC |
| Cone |
High stiffness, water repellent |
| |
|
| ELECTRICAL
|
| Input Impedance |
20 kΩ balanced, 10 kΩ unbalanced |
| Input Sensitivity |
+4dBu / 1.25 V |
| Signal Processing |
CORE processing, 96kHz / 40bit floating point SHARC DSP, 24 bit AD/DA converters |
| Direct access Controls |
4 Presets (Standard/InfraSub/Cardioid/User), Network Termination, GND Link |
| Remote Controls |
PRONET control software |
| Network protocol |
CANBUS |
| Amplifier Type |
Class D with SMPS, Variable Switching Frequency |
| Output Power |
1000W + 1000W |
| Mains Voltage Range (Vac) |
230V ±15% - 115 ±15% 50/60Hz (internally selectable) |
| IN / OUT Connectors |
Neutrik XLR-M / XLR-F |
| IN / OUT Network Connectors |
ETHERCON®(NE8FAV) |
| Mains Connectors |
PowerCon® TRUE1 - NAC3PX (In/Out) |
| Cooling |
Variable speed DC fan |
| |
|
| ENCLOSURE & CONSTRUCTION
|
| Physical Dimensions |
|
| Width |
570 mm (22.40”) |
| Height |
960 mm (37.80”) |
| Depth |
880 mm (34.65”) |
| Depth Including Wheels |
1008 mm (39.70”) |
| Enclosure Material |
15mm, reinforced phenolic birch |
| Paint |
High resistance, water based paint |
| Transport |
4 heavy duty 100 mm (4") castors, 6 handles |
| Net Weight |
70 Kg (154.30 lbs.) |
