Dual 15” (380mm) subwoofer

SW215A

AXIOM

The SW215A subwoofer is designed to deliver high quality low frequency reproduction where very high output is a key requirement, together with well defined deep bass response and fast transient response. Its compact size and light weight make it suitable for several different uses, ranging from touring applications to fixed installations and high-level dance clubs.The SW215A is a very high quality powered subwoofer system featuring some of the most advanced technologies for low frequency reproduction. Its unique and innovative design is based on a configuration that can be defined as Manifolded Band Pass. It uses manifolding of the front side of the cones to maximize the mutual coupling between the two drivers. This innovative configuration does not use any large resonant cavity to load the speaker, but very compact cavities in order to obtain advantages in terms of definition, both at the lowest end and the upper bass.


SYSTEM
System’s Acoustic Principle Manifolded Band Pass
Frequency Response (±3dB) 39 Hz – 100 Hz (Processed)
Maximum Peak SPL @ 1m 139 dB
TRANSDUCERS
Type Two 15” (380mm), 3” (75mm) VC
Cone High stiffness, water repellent
Voice Coil Type Flux Demodulating Ring
Suspension Double Centering Spider
ELECTRICAL
Input Impedance 20 k\u03A9 balanced, 10 k\u03A9 unbalanced
Input Sensitivity +4dBu / 1.25 V
Signal Processing CORE processing, 96kHz / 40bit floating point SHARC DSP, 24 bit AD/DA converters
Direct access Controls 4 Presets (Standard/InfraSub/Cardioid/ User), Network Termination, GND Link
Remote Controls PRONET control software
Network protocol CANBUS
Amplifier Type Class D with SMPS, Variable Switching Frequency
Output Power 1000W + 1000W
Mains Voltage Range (Vac) 230V ±15% - 115 ±15% 50/60Hz (internally selectable)
IN / OUT Connectors Neutrik XLR-M / XLR-F
IN / OUT Network Connectors ETHERCON®(NE8FAV)
Mains Connector PowerCon® (NAC3MPA)
Cooling Variable speed DC fan
ENCLOSURE & CONSTRUCTION
Physical Dimensions
Width 571 mm (22.48”)
Height 800 mm (31.50”)
Depth 582 mm (22.91”)
Depth Including Wheels 710 mm (27.95”)
Enclosure Material 15mm, reinforced phenolic birch
Paint High resistance, water based paint
Suspension system (SW215AF)
Side Suspension High Strength Steel with \u00BC Fast Pin
Back Suspension High Strength Steel with \u00BC Fast Pin
Wheels 4 heavy-load 100 mm ø
Net Weight SW215A: 64.5 Kg (142.20 lbs.) - SW215AF: 68.5 Kg (151 lbs.)