Dual 10” (260mm), High Output, Powered, CORE Processed, Vertical Array Element



The AX2010A is a new powered line array element that combines superior sound quality with easiness and flexibility in a simple system with a very convenient priceto-performance ratio. The AX2010A has been designed both for rental live sound applications and for fixed installations and has been engineered for the simplest use possible but without sacrificing anything in sound quality and performance.

System's Acoustic Principle: Line Array element, Short Transmission Line LF Back Loading, Acoustic Transmission Line HF Waveguide
Frequency Response (±3dB): 75Hz - 18kHz (Processed)
Horizontal Coverage Angle: 110° (-6dB)
Vertical Coverage Angle: 10° (-6dB)
Maximum Peak SPL@1m: 138 dB

LF: Two 10" (260mm), 2.5"(64mm) Alluminium voice coil, 16ohm each, paralleled
HF: Two 1.4" drivers, 2.5"(64mm) edgewound voice coil, titanium diaphragm, 16ohm each, paralleled

Input Impedance: 20 kohm balanced, 10 kohm unbalanced
Input Sensitivity: +4dBu / 1.25 V
Signal Processing: CORE processing, 96kHz / 40bit floating point SHARK DSP, 24 bit AD/DA converters
Direct access Controls: 4 Presets (Standard/Long throw/Down Fill-Singular Box, User), Network Termination button, GND Link button
Remote Controls: PRONET control software
Network protocol: CANBUS
Amplifier Type: Class D with SMPS, Variable Switching Frequency
Output Power: 1000W + 1000W
Mains Voltage Range (Vac): 230V ±15% - 115 ±15% 50/60Hz. (internally selectable)
IN / OUT Connectors: Neutrik XLR-M / XLR-F
IN / OUT Network Connectors: ETHERCON®(NE8FAV)
Mains Connector: PowerCon® (NAC3MPA)
Mains Link Connector: PowerCon® (NAC3MPB)
Cooling: Variable speed DC fan

Physical Dimensions
Width: 746 mm (29.37")
Height: 341 mm (13.42")
Depht: 530 mm (20.86")
Enclosure Material: 15mm, reinforced Phenolic Birch
Paint: High resistance, Water based paint
Suspension System
Front Suspension: Alluminium Fast Link structure
Back Suspension: High Strenght Steel with 1/4 Fast Pin
Net Weight: 40,32 Kg. (88,70 lbs)