LAB.GRUPPEN | LUCIA 120/1-70 | Lucia 120/1-70 Incorporates Ease Of Install With 120 W

Lucia 120/1-70 Incorporates Ease Of Install With 120 W

LUCIA 120/1-70

LAB.GRUPPEN

Overview

  • Designed for constant voltage applications – 1 x 120 W into 70 V/100 V1
  • Built-in 2x1 matrix – Mix two sources to mono or use for source selection
  • Comprehensive DSP features – Per channel presets for high-pass filter, parametric EQ, multi-band compressor, and look-ahead limiter
  • Automatic Dynamic Loudness Contouringgâ;\u00C2 – DSP automatically adapts to optimize performance at any output level
  • Optimized presets – Available for specific loudspeaker models
  • Configuration software – Windows and Mac software wizard for initial set-up (connection via USB)
  • GPIO – Remote control for output level and instant wake from sleep mode as default; other options possible via the configuration software
  • Compact form factor – Half-rack, 1U chassis and supplied bracket for flexible mounting
  • Efficient Class D amplifier – Patented design for low distortion and minimal heat dissipation
  • Fail-safe operation – Comprehensive short circuit, thermal and under-voltage protection
  • Intelligent fan control – Silent at idle and extremely quiet at low output levels
  • Selectable high-pass filter – Rear switches for ON/OFF and 50 Hz or 80 Hz filter; this is in series with the customizable input and output EQs (which are flat from the factory)
  • ENERGY STAR® qualified1 – Conforms to latest energy efficiency standards

 The peak voltage is 100 V, but the look-ahead limiter solution ensures that it cannot clip, so in real life use with music or speech it will typically be able to sustain a higher SPL in 100 V applications than 100 V amplifiers with higher peak voltage capability as the amplifier have the capacity to handle peaks way beyond “clip” without sounding harsh.