The KPTED1218 is the basic element of the EDGE systems flying bar. The element features front and rear flying-tracks for the connection of the loudspeakers and telescopic braces for the cross connection of the single KPTED1218 elements of the flying bar. The telescopic braces are fitted using numbered connecting points. By using the same position both for the front and the rear brace, the angle formed between the columns of the array will be 25°. The position of the extendable brackets, as well as changing the angle, can be used to alter the distance between the columns of the array: the longer the position of the bracket, the further apart the columns will be. For acoustic reasons, it is recommended to use corresponding holes for both the front and rear telescopic brackets in order to keep the angle between the columns at 25° and to minimize the distance between the columns of the array.

Accessories
NAME	DESCRIPTION
KPTEDTR1	Lifting bar for EDGE flying bar.
KPTEDTR2	Lifting bar for EDGE flying bar.
AC172P	Connection hinges for EDGE212P and EDGE218SP arrays. Maximum load 4900 N.
AC180	Chains with hooks
AC172E	Galvanized steel cable 0.23 dia with 2 double studs.
The product is accessory of
NAME	DESCRIPTION
EDGE212P	3 way horn loaded, full-range, bi-amp.
EDGE218SP	Direct radiation 2x18'' suspendable bass unit. Integrated flying system 'fly track'.